Tiller controls in 17 ft range

Ask questions before buying our plans or request a new design. Anybody can post here
cracked_ribs
Very Active Poster
Very Active Poster
Posts: 510
Joined: Sat Apr 11, 2015 11:58 pm
Location: Western Canada
Location: Ladysmith, BC

Re: Tiller controls in 17 ft range

Post by cracked_ribs »

Not necessarily...I have a full height bulkhead ahead of the motorwell. I don't find it to be an issue.

Ideally, if you put the motor on a jackplate, you can run a longer shaft motor, and get the tiller up pretty high, which gets it even more space. But I ran a motor at first that needed to run lower than the transom... and it still worked.

Image

Lousy pic of an unfinished boat but full height bulkhead, tiller motor. Works great. Holes cut for a side console for the future. Part of the reason I'm sticking with these old motors is you can rig them with controls, without necessarily giving up the tiller. I want both.


I designed my own boat. This is the build thread:

viewtopic.php?f=12&t=65349

Online
TomW1
Very Active Poster
Very Active Poster
Posts: 4401
Joined: Sun Apr 19, 2015 10:57 pm
Location: Bryson City, NC

Re: Tiller controls in 17 ft range

Post by TomW1 »

The tiller is above the transom and above the motorwell as I recall. If not it will tilt up to allow you to make up the difference. That is the one direction is is flexible in I believe.

Tom
Restored Mirror Dinghy, Bought OD18 built by CL, Westlawn School of Yacht Design courses. LT US Navy 1970-1978

OneWayTraffic
* Bateau Builder *
* Bateau Builder *
Posts: 1326
Joined: Sat Jan 10, 2015 7:13 pm
Location: New Zealand

Re: Tiller controls in 17 ft range

Post by OneWayTraffic »

The bulkhead needs to be there for structure, but the height of it is to do with safety. If you have a large sealed compartment/seat there then there's a fair margin safety wise. If you need to cut it, do so.

As drawn the motorwell bulkhead is 30" above the keel (not including any skeg) and 27" if you cut it straight across (no camber) to sit on.

TomTom
Very Active Poster
Very Active Poster
Posts: 627
Joined: Thu Nov 22, 2012 10:29 am
Location: East Africa

Re: Tiller controls in 17 ft range

Post by TomTom »

My feeling is the FS 17 would fit your needs best. It will be easier to build and also easier to keep light than the OB17. I have an OD 18 - it’s a very capable boat - and built light would work well - but I don’t like the flat bottom personally.

A Panga 20 with a tiller would be a very efficient boat for your needs as well.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest