Folding Anchor for D-15

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
alball
Frequent Poster
Frequent Poster
Posts: 140
Joined: Wed Sep 15, 2004 9:11 pm
Location: somerville, ma

Folding Anchor for D-15

Post by alball »

I am thinking about getting this anchor for my d-15...

Image

Code: Select all

This complete anchoring system is in a class by itself. The 3-1/3 lb. 4-fluke folding anchor will hold in mud, sand, gravel, and rock. Designed for boats, sailboats, personal watercraft, inflatable boats,canoes and float tubes, the anchor is coated to protect finishes. The durable nylon storage case is padded for added protection and to dampen noise when the anchor is stowed. Fits under most boat seats, in PWC storage compartments, or in PWC storage canisters! The 25 ft. long marine-grade rope, with an inline buoy, is spliced to the anchor and a heavy-duty stainless steel snap hook.
I like it becuase it is small, easy to store, and coated with rubber(non-marring).It would easily fit in the underseat storage compartments. I am currently using a danforth anchor with about 4 feet of chain, and it is a real pain to manage and store. Do you think this one is large enough to hold a d-15? Most of the time I am anchoring in sand or mud, and sometime on a pebbly lake bottom.

al

User avatar
tech_support
Very Active Poster
Very Active Poster
Posts: 12318
Joined: Wed Dec 31, 1969 7:00 pm
Location: Vero Beach, FL
Contact:

Post by tech_support »

Im sure it will hold it to some point, but not as well as the danforth and chain. With a light breeze/current it would probably be ok, but it will probably drag when the wind blows. I use one of those with my canoe.

JerryF
Active Poster
Active Poster
Posts: 273
Joined: Mon Aug 26, 2002 1:00 am
Location: San Jose, CA

Post by JerryF »

I had a similar anchor for use with an inflatable. In stock form it would only hold in a rocky bottom and no wind. I added a 6 foot length of chain between the anchor and the poly line. With that mod it worked fairly well in soft bottoms too.

A D15 may be too heavy and have too much windage for such a light anchor. On my GV11+, I use a ten pound iron weight with a short chain as a calm water fishing anchor. Stores fairly easily and doesn't have any flukes to snag or gouge the hull.
JerryF
GV11+ G3

User avatar
Evan_Gatehouse
Very Active Poster
Very Active Poster
Posts: 3211
Joined: Tue Aug 27, 2002 1:00 am
Location: Vancouver, BC, Canada

Post by Evan_Gatehouse »

In short - no. I used same size for a FB11 on snorkeling trips. I wouldn't use one of them on anything much larger.

Get a plastic milk crate and keep the anchor and chain and rode in that
designer: FB11/GV10,11,13/ HMD18/
SK17,MM21/MT24

User avatar
Cracker Larry
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 22491
Joined: Fri Mar 11, 2005 3:39 pm
Location: Savannah, GA

Post by Cracker Larry »

And then put more than 25' of line on it. An anchor is sort of like a parachute. When you really need one, it needs to be a good one.

Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests