Boat Builder Central - Builder Forums

Posted: **Thu Sep 21, 2006 9:42 am**

On the subject of places to add CF tape:
Capping the transom between the motor well sides might be a good place. That would just about eliminate what little flex there might be across the transom since the rectangle that the motor bolts to would then be braced on three sides with the motor well and the top would have an inverted U shaped CF beam across it. Probably not absolutely necessary, but still not a bad place to add a little overkill for promotional purposes.

Posted: **Thu Sep 21, 2006 10:39 am**

2stinger wrote:You mean a Carbon-Kevlar-Fiberglass-Epoxy-Polyester Composite Boat. Not too shabby.

with Perko flush mount hammer holders... that should get another 50 bucks asking price...

Posted: **Thu Sep 21, 2006 10:47 am**

hardware will be by Accon

They are the "kings" of pop-up hardware.

Posted: **Thu Sep 21, 2006 11:09 am**

A pop-up hammer holder sounds dangerous...

Posted: **Thu Sep 21, 2006 11:53 am**

Anonymous wrote:A pop-up hammer holder sounds dangerous...

'specially if yer sittin' on the rail when it pops! Yikes!!! I'm sorry, I couldn't resist that opportunity!

Posted: **Thu Sep 21, 2006 1:53 pm**

Name the boat *Three Stooges*?

also needs an oversized boat hook to swing around knocking people in the head...

Posted: **Mon Oct 02, 2006 12:19 pm**

Stringers are glassed in - there are 3 layers (offset) of 12 oz. Biax tape. Also filled in the strakes.....

Posted: **Mon Oct 02, 2006 1:35 pm**

If we could all manage laminations that nice there would be no more questions to ask!

Daniel

Posted: **Mon Oct 02, 2006 1:55 pm**

If we could all manage laminations that nice there would be no more questions to ask!

Daniel

You too will soon be there grasshopper.

Posted: **Mon Oct 02, 2006 2:50 pm**

Thanks guys, but there is nothing to it besides "wet on wet"

Boat Builder Central - Builder Forums

Aquasport Rebuild - Classic "Flatback"