Okume plywood in Cali. found some 1/2in. for$16

Post by **jacquesmm** » Thu Sep 05, 2002 3:42 pm

That sound too good to be true Okume marine. Check it. If it is true, I´ll buy a pallet for our prototypes, no matter what the shipping cost.

Eric · Post by **Eric** » Thu Sep 05, 2002 8:09 pm

I´d take a full pallet as well. Where might this wood be?

Post by **jacquesmm** » Thu Sep 05, 2002 8:17 pm

What happened to the original message? It looks like somebody realized this was not possible and deleted his message. Eric, I was first. I want two pallets!!!!

volleyball958 · Post by **volleyball958** » Fri Sep 06, 2002 2:40 am

its 5 ply okume lual ply, not marine ply,looks nice, but not the good stuff...

Eric · Post by **Eric** » Fri Sep 06, 2002 12:32 pm

Okay Jacques, you can have it all. Sounded too good to be true.

Post by **jacquesmm** » Fri Sep 06, 2002 1:38 pm

Let´s stop teasing the person who asked the question but, if this is exterior Lauan, 5 ply, it could be perfect for some of our small boats. Is it exterior? Which boat are we talking about?

volleyball958 · Post by **volleyball958** » Sat Sep 07, 2002 10:20 pm

its an inported plywood, so it may be ex. glue, cant tell, give em a call, although they may not know as well.They are storing it inside a wherehouse though.Looks real nice, A on both sides, no visable voids. Already 1/2 done with my d15 so i dont need any now( although i may get a couple of sheets and use em for the cockpit, leave the wood bright). [ This message was edited by: volleyball958 on 07-09-2002 22:24 ]

Boat Builder Central

Builder Forum