Drain tube flaring tool

Forum for the exchange of boat building tools. Not a classified section, tools only please.
montuno
Frequent Poster
Frequent Poster
Posts: 24
Joined: Mon Nov 02, 2009 9:51 pm

Re: Drain tube flaring tool

Post by montuno »

majorgator wrote:tool placed in mail today to montuno/javier

please return when done...and good luck on getting that boat in the water :wink: :wink:

seth
Done! thanks ...will be out tomorrow back to you
Javier

majorgator
* Bateau Builder *
* Bateau Builder *
Posts: 1794
Joined: Tue Apr 29, 2008 8:58 pm
Location: High Springs, FL

Re: Drain tube flaring tool

Post by majorgator »

OK, I've got the tool again. Still haven't used it, but will send to someone who needs it more than I.

seth
Saved by the Blood of Jesus!
See my XF20 Build Thread
Image
Image

jmbadge
New Poster
New Poster
Posts: 4
Joined: Tue Feb 02, 2010 7:55 pm

Re: Drain tube flaring tool

Post by jmbadge »

Hi Seth,
Will be needing the flaring tool with a quick turnaround. could you e mail me for my address ?
Thank You.Jmbadge...
1989 overnighter 2005 150 yamaha

majorgator
* Bateau Builder *
* Bateau Builder *
Posts: 1794
Joined: Tue Apr 29, 2008 8:58 pm
Location: High Springs, FL

Re: Drain tube flaring tool

Post by majorgator »

jmbadge -
send me an email with your address
sethgs0982 at gmail dot com
Saved by the Blood of Jesus!
See my XF20 Build Thread
Image
Image

majorgator
* Bateau Builder *
* Bateau Builder *
Posts: 1794
Joined: Tue Apr 29, 2008 8:58 pm
Location: High Springs, FL

Re: Drain tube flaring tool

Post by majorgator »

tool sent to jmbadge today...
Saved by the Blood of Jesus!
See my XF20 Build Thread
Image
Image

Larry B
* Bateau Builder *
* Bateau Builder *
Posts: 2460
Joined: Tue Oct 02, 2007 10:30 am
Location: Arizona

Re: Drain tube flaring tool

Post by Larry B »

majorgator wrote:tool sent to jmbadge today...
Dang, much more shipping charges for you, you could have bought one :wink:
Completed: FL14, OD18

majorgator
* Bateau Builder *
* Bateau Builder *
Posts: 1794
Joined: Tue Apr 29, 2008 8:58 pm
Location: High Springs, FL

Re: Drain tube flaring tool

Post by majorgator »

...much more shipping charges for you...
Yeah, tell me about it :wink: I don't want to break the seal on my large tube of 3M 5200 for two little drain holes, so I'll put this off a little while :lol: :lol: Plenty of other things to do on the XF to keep me busy though...

seth
Saved by the Blood of Jesus!
See my XF20 Build Thread
Image
Image

Larry B
* Bateau Builder *
* Bateau Builder *
Posts: 2460
Joined: Tue Oct 02, 2007 10:30 am
Location: Arizona

Re: Drain tube flaring tool

Post by Larry B »

I just bought the 1" and 1 1/4" moeller flange tool for $36.00 each. Thought it was a good deal. Just went to the site and they have raised the price in less than a week. :doh:

Edit: My bad, they are still 36 bucks :wink:
Completed: FL14, OD18

jmbadge
New Poster
New Poster
Posts: 4
Joined: Tue Feb 02, 2010 7:55 pm

Re: Drain tube flaring tool

Post by jmbadge »

Got the tool about a week ago replaced the starboard side with no problem, the port side is a different story.I must have cranked to hard on the tool and a small crack developed in the brass tube. Its just on the outside rim though.What do you think guys should I redo the port tube or let it go for awhile.... Feedback welcome.. Thanks .. Jmbadge..
1989 overnighter 2005 150 yamaha

User avatar
Cracker Larry
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 22491
Joined: Fri Mar 11, 2005 3:39 pm
Location: Savannah, GA

Re: Drain tube flaring tool

Post by Cracker Larry »

Who's got the flaring tool? I need it for a quick project. Thanks 8)
Completed GF12 X 2, GF16, OD18, FS18, GF5, GF18, CL6
"Ships are the nearest things to dreams that hands have ever made." -Robert N. Rose

Locked

Who is online

Users browsing this forum: No registered users and 0 guests