Boat Builder Central - Builder Forums

Posted: **Mon Dec 08, 2008 9:58 pm**

Joel, thanks for making this a permanent topic

I'll copy mine from the other thread.

I see I've already broken the rules, sorry

I've started by donating a drain tube flaring tool to the BBC community. This is a must have to install the tubes correctly, but something you only need for a couple of days during a build.

It's free to anyone here who needs it The only charge is that you have to pay the shipping (5$) to the next person. Keep the tool clean and don't forget you have it.

I've finished up with it and sent it to Craig (Cape Man). When he is finished he will ship it to the next user, and so on. If we can keep up with it, it will help build a lot of boats and save each builder about $50

If you need it, get your name on the list

Posted: **Mon Dec 08, 2008 11:21 pm**

Curious about the flaring tool CL, is it something I'll need and just don't know?

Panga 22 btw

Posted: **Tue Dec 09, 2008 11:39 pm**

Larry I could use that soon...

Posted: **Wed Dec 10, 2008 11:51 am**

OK Bob, it's yours when Craig gets finished

Posted: **Sun Dec 21, 2008 8:32 am**

Bob,

Send me an email with your address. I should be finished in a few days and will mail it to you.

"cawatson at ufl.edu"

Posted: **Mon Dec 29, 2008 5:13 pm**

Bob,

It's on its way! Enjoy!

Craig

Posted: **Mon Dec 29, 2008 5:40 pm**

Posted: **Tue Dec 30, 2008 12:57 pm**

Excellent idea guys. Thanks for starting this Larry, I'll be putting my name on the list when I'm ready.

Posted: **Thu Jan 01, 2009 12:13 pm**

I have it Thanks...

Posted: **Mon Jan 12, 2009 11:56 pm**

Well it is finished....
The tool will not crimp both sides on a 1/2" transom so I put a washer on the already crimped side and crimped the cut side... I am adding a tool to the list that will stay with the crimp dies.... a small tube cutter harbor freight has them on sale for $4.00 and I am going to add it to the package because this brass tubing is a pain to cut without one it likes to get flat spots when you cut it with a jigsaw anyways Tool is ready to ship next week... Bob

Posted: **Sun May 17, 2009 9:13 pm**

I am at a point where I am ready to install two drain tubes in the transom of my Dory Restoration. Do you still have it Bob?

Posted: **Wed Jul 01, 2009 2:49 pm**

I should be ready in about ten days(I hope). Who's got it now?

Thanks.

Jbo

Posted: **Wed Jul 01, 2009 3:34 pm**

Bob still had it the last I heard

I just sent him an email. I'll be needing it again when you're finished with it

Posted: **Wed Jul 01, 2009 6:30 pm**

OK, I just heard from Bob, he sent it to Captj13 yesterday.

Posted: **Mon Jul 06, 2009 4:52 pm**

I got the flaring tool today from Bob. Thanks Bob. Jbo, send me an e-mail with your address and I'll send it out to you when I'm done.

Update: I got my three drain tubes installed and the tool is boxed and ready to ship to whoever needs it next. I had two that needed to go in 1/2 " thick areas so I ended up doing what bob did. Started the flaring, then removed the piece on the already flared job to finish. Worked well. I also added a new piece to the kit: a short nipple to use as a bushing for thinner transoms.

Posted: **Sat Jul 11, 2009 5:44 pm**

I'll e-mail you, but I hit a snag(weather). Send it to CL and I'll get it from him. I don't want to slow down progress.

Thanks.

Jbo

Posted: **Sat Jul 11, 2009 7:22 pm**

Larry,
You want me to send you the tool back or just hang onto it till the next guy needs it?
John

Posted: **Sat Jul 11, 2009 9:15 pm**

Just hang on to it John, or send it on to Jbo. Bad weather doesn't last long

I've got a couple extra 1 1/4" tubes from the OD and I'll use one of those on this GF12.

Posted: **Sat Jul 11, 2009 9:29 pm**

I'll hang onto to it till someone is ready to use it. Thanks again for putting it out there,
John

Posted: **Mon Aug 03, 2009 8:21 am**

I am in need to the tool to finish my boat rebuild. Please email me and I will get you my shipping address.

Thank You.

Posted: **Mon Aug 03, 2009 9:50 am**

Email sent.

Posted: **Wed Aug 05, 2009 9:07 am**

I'd like to be added on the list to use the flaring tool when the next person is finished. One question though, my transom is a minimum 2 3/4" thick. Wll this tool be good for my application? Thanks, Mike.

Posted: **Wed Aug 05, 2009 10:05 am**

You got it Mike, Captj will hook you up. No problem on the hull thickness, my transom is at least that thick. Worst case you just use a longer bolt on the tool.

Your Grady rebuild is moving fast! Nice work

Posted: **Wed Aug 05, 2009 3:34 pm**

Thats great Larry. Appreciate it. Yes, I'm staying on top of getting this transom done. I know how I am. If I walk away for a week, it will turn into a month, and on and on. I wanted to get rear floor section back in today, but it started pouring rain. I should have it back in tomorrow. Mike

Posted: **Wed Aug 05, 2009 3:51 pm**

Yeah, it's important to keep the momentum. I've about lost mine today. 99 degrees and the afternoon storms just started. I think it's going to take a hurricane to break this weather pattern

Posted: **Wed Aug 05, 2009 4:16 pm**

I hope not. I live in Florida. I'm in Vero Beach where two back to back ones came through in '04. You guys have had a few rough ones too. Mike

Posted: **Wed Aug 05, 2009 5:16 pm**

It will be in tomorrows mail Mike. You should have it by Saturday.

John

Posted: **Wed Aug 05, 2009 9:48 pm**

Great John!

I appreciate it. Mike

Posted: **Sat Aug 08, 2009 8:10 pm**

John, received the tool(s) today. I appreciate you getting it out to me so quickly. I'm running two days behind because of rain, but should catch up tomorrow. Thanks again, Mike.

Posted: **Sat Aug 08, 2009 9:36 pm**

Glad you got it Mike ! I don't think there is anybody waiting for it .... so take your time.
Nice work on the Grady ! was looking at your project.

John

Posted: **Wed Sep 09, 2009 9:12 am**

I'm finished with the draintube flaring tool. If anyone needs to use it, it is available. Let me know if you need it. I'd also like to thank Cracker Larry, for bringing this tool into the BBC loaner program. I appreciate it. Mike

Posted: **Sat Sep 19, 2009 12:43 pm**

I'd like to get the tool.

Email sent to Mike.

Posted: **Sat Sep 19, 2009 9:39 pm**

BigBand, welcome to the group

I see this is your first post. Why don't you introduce yourself and tell us about your project. We like to see some pictures too. Boat porn we call it.

Our tool lender program works like this, you share your project and we'll share some tools. No offense meant at all, that's just the way it works

Again, welcome, and tell us what ya got going on.

Posted: **Sun Sep 20, 2009 2:01 pm**

Cracker Larry wrote:BigBand, welcome to the group. I see this is your first post. Why don't you introduce yourself and tell us about your project. We like to see some pictures too. 'Boat porn' we call it.

Our tool lender program works like this, you share your project and we'll share some tools. No offense meant at all, that's just the way it works. Again, welcome, and tell us what ya got going on.

Hi Larry - thanks for the welcome! While I'm not building a boat from 'scratch', I am rebuilding a fg duck boat. It's a Ducker, which was made locally by Outlaw Marine. One of the areas trhat needs attention is the drain. It's been drilled out, or worn out, to the point that it leaks. Not what I want when it's 25 degrees out there, and I'm sitting on my keester in cold water!

I'll need to reinforce the area that the drain is in, and then install a new tube. While it's tempting to just epoxy the tube, that will make it difficult to service it in the future. I've attached a few pictures of the current project.

On a personal level, I'm a 61 year old avid duck and goose hunter in N. Idaho, near Coeur d'Alene. I have a passion for boats (currently have four in the fleet), especially the older designs from the past years of duck hunting history.

Posted: **Sun Sep 20, 2009 4:37 pm**

That's a cool little boat, BB

I don't know much about duck boats, are the lines around the gunwales to attach a blind?

You pass. See how easy we are here

Mike, please send the man the flaring tool.

The only other requirement of use is that you monitor this forum occasionally, until you pass it on to the next user. The current user pays the freight to the next.

Good luck with the rebuild and send us some more pictures

Posted: **Sun Sep 20, 2009 8:00 pm**

Will do Larry. BigBand, email me your mailing address and I'll get the tool(s) out to you right away. Welcome, Mike.

Posted: **Mon Sep 21, 2009 9:56 am**

BigBand, be advised flaretool, along with pipe cutter is in the mail on the way to you. Priority mail. Mike

Posted: **Mon Sep 21, 2009 10:39 am**

Great !

Posted: **Fri Sep 25, 2009 10:27 am**

BigBand, I see that you have received the flaring tool. Hope it helps you out on your project. Mike

Posted: **Fri Sep 25, 2009 11:19 am**

I'm out of town for a few days, but I'll get on asap so it is available to others.

Posted: **Sat Sep 26, 2009 11:52 am**

i need the flaring tool!!! who do i send the five dollars to?

Posted: **Sat Sep 26, 2009 5:25 pm**

Have you got that GF16 finished already

You've only been working on it a month. I wouldn't install the drain tubes until I was finished painting, it will look nicer and you don't have to mask them. But if you're ready for it, you'll be next on the list.

There is no charge for using the tool, you just pay the shipping to the next person who needs it. Once BigBand is finished with it, he'll mail it to you.

Posted: **Sat Sep 26, 2009 8:54 pm**

thanks i think im going to use your advice and wait untill we are further along in the building process to borrow the tool

Posted: **Sun Sep 27, 2009 12:31 am**

Let me know when you need it.

Posted: **Tue Oct 06, 2009 9:02 pm**

Hey goys, I'm done with the tool. Do I keep it until someone else wants it, or send it back to the 'tool crib' ?
BigBand

Posted: **Tue Oct 06, 2009 9:18 pm**

Hold on to it the next guy to need it will e-mail you.

Tom

Posted: **Wed Oct 07, 2009 12:24 pm**

Posted: **Sat Oct 10, 2009 7:22 pm**

ok who has the flaring tool now? cause i am right at the final process and figure that it takes a few days to ship and wanted to know who to email

Posted: **Sat Oct 10, 2009 11:04 pm**

Where to get the actual tube? I looked at BBC and couldn't find it.

. . . and I'll need to be next in line for the tool as soon as I find the tube.

Jbo

Posted: **Sun Oct 11, 2009 10:55 am**

go here and search for drain tube

Posted: **Tue Oct 13, 2009 8:29 pm**

does anybody have instructions for the flaring tool

Posted: **Tue Oct 13, 2009 9:12 pm**

Cut tube about 3/16 longer than hole depth. Coat with sealer, 5200 or epoxy, insert in hole. Install one die on each side of tube. Insert bolt. Attach washer and nut. Tighten until squashed.

Posted: **Tue Oct 13, 2009 10:07 pm**

thanks larry

Posted: **Sat Oct 31, 2009 5:00 pm**

OK. I need the tool now. Does fishingdude have it?

Thanks.

Jbo

Posted: **Mon Nov 02, 2009 3:05 pm**

I think either Bigband or myvoodoo has it

Speak up guys, ya got to pass the torch

Posted: **Sat Nov 07, 2009 8:56 am**

Cracker Larry wrote:Cut tube about 3/16 longer than hole depth. Coat with sealer, 5200 or epoxy, insert in hole. Install one die on each side of tube. Insert bolt. Attach washer and nut. Tighten until squashed.

Hey Larry,

What diameter hole do you drill. Drilling a 1" hole with a hand drill is going to end up wiht a hole slightly over 1". Does that provide enough gap for the 5200 to seal properly? Or do you go to a 1 1/8" bit leaving a 1/16" gap all around?

Regards,
Steven

Posted: **Sat Nov 07, 2009 9:03 am**

A 1" hole saw does a perfect job, makes a good snug fit.

Did we find the tool?

Posted: **Sat Nov 07, 2009 11:32 am**

It's a sad day when you can't find your tool.

Posted: **Sat Nov 07, 2009 4:40 pm**

Posted: **Sat Nov 07, 2009 4:46 pm**

Cracker Larry wrote:

Don't be sad Larry, it can't be lost one of the 6460 members here has to have it!

Posted: **Sat Nov 07, 2009 6:34 pm**

According to this thread Bigband has it still.

Posted: **Sat Nov 07, 2009 6:48 pm**

cape man wrote:According to this thread Bigband has it still.

Jeez if that's true it's gonna be in use for a long time!!! Big Band how many trumpets, trombones, etc to flair in a big band?

Posted: **Mon Nov 09, 2009 12:55 pm**

I never heard anything, so I came up with another plan. No big deal for me. Hope we locate the tool.

Jbo

Posted: **Mon Nov 09, 2009 1:03 pm**

I sent him an email, maybe he'll respond

Posted: **Mon Nov 09, 2009 2:21 pm**

Cracker Larry wrote:I sent him an email, maybe he'll respond

Sorry guys, for the delay. I don't check this forum often enough.

I sent the tool to myvoodoo about three weeks ago. I didn't actually use it, as my
drain tube is too close to the floor of the boat. I ended up using epoxy to 'glue' the
brass tube to the 1/4" fiberglass hull. While the epoxy was still fluid, I used a heat
gun to flow it. Made a real good looking seal.

BigBand

Posted: **Mon Nov 09, 2009 2:31 pm**

Thank ya Sir

Posted: **Tue Nov 10, 2009 9:31 pm**

sorry me and my grandpa havent been on the site in a while and didnt know anybody needed it yet we should be done with it in a few days and be able to pass it on.

again sorry

i just contacted my grandpa and he said that we should be done with it around next tuesday and that he wants to know who the next person in line is so he can contact them to find where to send the tool to.

Posted: **Wed Nov 18, 2009 9:36 am**

I am finished with the flaring tool and will be glad to forward to the next user, just send me your address and email.
I have been finished for a week now and my grandson "fishing dude#1" I thought posted this on the forum.....Anyway, someone let me know. Bill

Posted: **Mon Nov 23, 2009 10:47 pm**

Hey myvoodoo

I sent you an email. Gettin about time for me to start flairing some tubes

Will

Posted: **Tue Nov 24, 2009 9:31 am**

ok we will be shipping the tool out tomorrow

thanks

Bill

Posted: **Mon Nov 30, 2009 6:21 pm**

Got the tool in today. Thanks Bill. Whoever is next just let me know, and I'll send it to you ASAP.

Will

Posted: **Thu Dec 03, 2009 12:19 pm**

Hi Will, Please don't send the flaring tool to me, just forward it to the next person who requests it. I cut the end off my drain tube 3/16" longer than the projection from the transom and used 3M 5200 sealant to seal, works great.
Bill

Posted: **Thu Dec 03, 2009 1:24 pm**

That tool's getting around faster than Tiger Wood's

My rough count is 12 boats in 12 months in 12 states

Posted: **Mon Dec 07, 2009 5:18 pm**

Cracker Larry wrote:That tool's getting around faster than Tiger Wood's My rough count is 12 boats in 12 months in 12 states

Thats funny Larry, I think Tiger may have even used his tool overseas. That dude is a real jack in the box.

Posted: **Thu Dec 10, 2009 11:14 pm**

Does anyone where the tool is right now ? I am ready to do mines...and can have it shipped back to anyone who needs it the day after...Thanks guys

Posted: **Fri Dec 11, 2009 12:15 am**

Will has it see up above and e-mail him.

Tom

Posted: **Fri Dec 11, 2009 8:21 am**

Hey Javier,

I do have the tool. If you email me your address to wegcagle at gmail dot com. I will send it out Monday.

By the way, I am using the tool today. Should I use 5200 or epoxy glue to seal the tube in place???

Will

Posted: **Fri Dec 11, 2009 9:36 am**

I use 5200

Posted: **Mon Dec 14, 2009 1:08 pm**

I never received an email from Javier. Just let me know when and where. The flairing tool is ready for the next customer.

wegcagle at gmail dot com

Posted: **Mon Dec 14, 2009 4:48 pm**

Will he has e-mail activated why don't you send him one as a courtesy. Won't hurt. Maybe something wrong with the e-mail address he used.

Tom

Posted: **Mon Dec 14, 2009 5:48 pm**

Done

Will

Posted: **Mon Dec 14, 2009 8:34 pm**

wegcagle wrote:I never received an email from Javier. Just let me know when and where. The flairing tool is ready for the next customer.

wegcagle at gmail dot com

Sended reply...thanks Will!!!

Posted: **Fri Jan 08, 2010 4:12 pm**

Javier,

I am SO SORRY. I realized today that drain tube flairing tool has not been sent. I packaged it up and thought my wife was going to ship, and she thought I had already done it.

Anyway I found the package today. Do you still need it?? If you do I will send ASAP.

Again I am so sorry about the delay.

Will

Posted: **Sun Jan 24, 2010 7:19 am**

who currently has the flaring tool, and when do you think you'll be done with it? thanks!

seth

Posted: **Sun Jan 24, 2010 9:05 am**

Hey Seth
I still have the tool and can have it sent to you when you are ready. Send me your address to wegcagle at gmail dot com

Will

Posted: **Sun Jan 24, 2010 9:36 am**

Will -
I'll need it within the next month or so, but I just wanted to start tracking it. When I get ready, I'll let you know. Thanks!!!!

seth

Posted: **Wed Feb 03, 2010 7:36 pm**

Just wanted to be added to the list, will be needing the tool as weather breaks.. Thanks jmbadge.

Posted: **Tue Feb 16, 2010 9:00 pm**

Flaring Tool is in hand. I'll use it as quickly as possible and turn it around. If someone else needs it before I have a chance to use it, that's OK. Just let me know, and I'll be diligent to turn it around quick.

seth

Posted: **Fri Feb 26, 2010 12:53 am**

Tool needed and ready for it...sent email to majorgator.Thanks

Posted: **Mon Mar 01, 2010 9:55 am**

tool placed in mail today to montuno/javier

please return when done...and good luck on getting that boat in the water

seth

Posted: **Sat Mar 06, 2010 12:27 am**

majorgator wrote:tool placed in mail today to montuno/javier

please return when done...and good luck on getting that boat in the water

seth

Done! thanks ...will be out tomorrow back to you

Posted: **Sat Mar 13, 2010 4:27 pm**

OK, I've got the tool again. Still haven't used it, but will send to someone who needs it more than I.

seth

Posted: **Mon Mar 15, 2010 7:42 pm**

Hi Seth,
Will be needing the flaring tool with a quick turnaround. could you e mail me for my address ?
Thank You.Jmbadge...

Posted: **Wed Mar 17, 2010 10:22 pm**

jmbadge -
send me an email with your address
sethgs0982 at gmail dot com

Posted: **Mon Apr 12, 2010 6:07 pm**

tool sent to jmbadge today...

Posted: **Mon Apr 12, 2010 6:41 pm**

majorgator wrote:tool sent to jmbadge today...

Dang, much more shipping charges for you, you could have bought one

Posted: **Mon Apr 12, 2010 9:33 pm**

...much more shipping charges for you...

Yeah, tell me about it

I don't want to break the seal on my large tube of 3M 5200 for two little drain holes, so I'll put this off a little while

Plenty of other things to do on the XF to keep me busy though...

seth

Posted: **Mon Apr 12, 2010 9:44 pm**

I just bought the 1" and 1 1/4" moeller flange tool for $36.00 each. Thought it was a good deal. Just went to the site and they have raised the price in less than a week.

Edit: My bad, they are still 36 bucks

Posted: **Tue Apr 20, 2010 9:41 pm**

Got the tool about a week ago replaced the starboard side with no problem, the port side is a different story.I must have cranked to hard on the tool and a small crack developed in the brass tube. Its just on the outside rim though.What do you think guys should I redo the port tube or let it go for awhile.... Feedback welcome.. Thanks .. Jmbadge..

Posted: **Wed Jul 14, 2010 6:45 pm**

Who's got the flaring tool? I need it for a quick project. Thanks

Posted: **Wed Jul 14, 2010 7:17 pm**

Cracker Larry wrote:Who's got the flaring tool? I need it for a quick project. Thanks

C Larry, if you want I can ship mine out to you, I'm not going to use it for awhile. Let me know

Posted: **Thu Jul 15, 2010 8:56 am**

That would be cool if the other one doesn't turn up in a day or so

Thanks Larry.

Posted: **Thu Jul 15, 2010 8:59 am**

Cracker Larry wrote:That would be cool if the other one doesn't turn up in a day or so Thanks Larry.

I can put it in the mail today, you should have it by Monday. Let me know and email me your address.

Posted: **Thu Jul 15, 2010 9:10 am**

Go ahead and send it, if you don't mind.
Thanks!

Posted: **Thu Jul 15, 2010 10:03 am**

Did you need the 1" or the 1 1/4"?

Posted: **Thu Jul 15, 2010 10:51 am**

1" please

Posted: **Thu Jul 15, 2010 11:00 am**

It will go out today. You can delete your address if you want, I've got it now.

Posted: **Thu Jul 15, 2010 1:06 pm**

Sent,
man I gotta slow down. Got a dang photo radar ticket on the way to the Post Office. Thats one part of AZ that I don't like

First one for me, wife got one about a month ago

Posted: **Thu Jul 15, 2010 1:46 pm**

Those photo tickets are just wrong in my opinion, shouldn't be legal for those states to use that have them. We don't have any photo enforcement equipment anywhere in WY and that's how it should be.

I could rant on about how they don't meet the criteria for lawful enforcement, but then I'd just be derailing yet another post

Posted: **Thu Jul 15, 2010 3:40 pm**

Thanks Larry, but it wasn't important enough to get a ticket over

Posted: **Thu Jul 15, 2010 3:47 pm**

Cracker Larry wrote:Thanks Larry, but it wasn't important enough to get a ticket over

I just wasn't paying attention, probably thinking about my boat

Not your fault, not the tools fault, just my not paying attention

btw, should be there by monday. Unlike a lot of people in this country I take responsibility for my actions

Posted: **Thu Jul 15, 2010 3:55 pm**

Yep, me too

Posted: **Tue Jul 20, 2010 12:13 pm**

Got your flaring tool today Larry B, thanks again

How soon do you need it back?

Wonder what happened to our community flaring tool

Posted: **Tue Jul 20, 2010 12:34 pm**

Cracker Larry wrote:Got your flaring tool today Larry B, thanks again How soon do you need it back?

Wonder what happened to our community flaring tool

No hurry, I've got mostly 1 1/4" and only a few 1" that can wait till whenever, but probably in a month or two

and then if you still need it just let me know because I still might not be ready

Thats the problem with the community tools, they get lost or grow legs

usually by no intention of the one doing it. Blame it on the CRS

Posted: **Wed Aug 04, 2010 10:21 pm**

Forwarded your address Larry .... hopefully the "community flaring tool" is on the way to you now,

John

Posted: **Wed Aug 04, 2010 11:24 pm**

Thank you John

Posted: **Sat Aug 21, 2010 7:03 am**

Hopefully the community flaring tool is accounted for now. If so, and if its available, I'd like to use it. Let me know where its at and we'll go from there.

seth

Posted: **Sat Aug 21, 2010 9:04 am**

No, it's still not accounted for

Was supposed to be shipped to me, but it didn't happen

Posted: **Sat Aug 21, 2010 6:07 pm**

Darn! Well hopefully it gets there soon. I could use it within the next few weeks.

seth

Posted: **Wed Aug 25, 2010 2:16 pm**

Tool was sent out to Larry hope you get it soon, Thanks a million. Jmbadge

Posted: **Wed Aug 25, 2010 3:17 pm**

Thank you much sir

I appreciate it, glad it helped you out

Posted: **Thu Aug 26, 2010 6:14 am**

If no one else has asked for it, let me send an email with my address??

seth

Posted: **Thu Aug 26, 2010 3:03 pm**

Send it to me Seth.

Posted: **Wed Sep 01, 2010 6:35 pm**

Got the flaring tool JM, thanks

I've probably had it a few days, only go to the mailbox about once a week

Seth, how soon do you need it? I wouldn't flare the tubes in place until after the boat is painted inside and out.

Posted: **Thu Sep 02, 2010 9:25 am**

In that case, I probably don't need it to quickly. Maybe another month or so before the exterior painting occurs.

seth

Posted: **Fri Sep 17, 2010 10:03 pm**

Scratch that...I won't be needing the flaring tool. I bought garboard drains instead.

seth

Posted: **Thu Sep 30, 2010 12:11 pm**

Cracker Larry wrote:Got your flaring tool today Larry B, thanks again How soon do you need it back?

CL, just so you don't forget me, I could be as close as a month for needing the flaring tool back. If you need it longer just let me know and I'll work around it.
Larry B

Posted: **Thu Sep 30, 2010 1:52 pm**

I'll get it on the way to you Larry, thanks for the loan. Glad to hear you are progressing so fast

Posted: **Fri Oct 01, 2010 1:03 pm**

Cracker Larry wrote:I'll get it on the way to you Larry, thanks for the loan. Glad to hear you are progressing so fast

No problem, glad I could help you for a change

I'm not setting any dates, but hoping for a Christmas Splash

Posted: **Fri Oct 01, 2010 1:04 pm**

Does that mean you'll be towing it to Boca Grande

Posted: **Fri Oct 01, 2010 1:38 pm**

Cracker Larry wrote:Does that mean you'll be towing it to Boca Grande

I wish

But I can fly back and forth about 5 times for the cost to tow it. But maybe one day

Posted: **Thu Oct 14, 2010 3:17 pm**

CLarry, got the tool today, Thanks

Posted: **Thu Oct 14, 2010 4:19 pm**

Great, thank you too

Posted: **Sat Mar 12, 2011 12:10 am**

idiots spamming forums

Posted: **Thu Mar 17, 2011 5:17 pm**

Do yall ever wonder why anyone would go to all this trouble? What's the gain

I don't get it. I don't think they are getting rich

Posted: **Thu Mar 17, 2011 5:21 pm**

Yeah, I really don't get it either. I've reported every one of these posts as well, but they don't seem to be getting any attention

Posted: **Sat Mar 19, 2011 4:19 am**

I am locking this topic. It is only attracting spam.

BWM

Boat Builder Central - Builder Forums

Drain tube flaring tool

Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool

Re: Drain tube flaring tool