hm19 flip photo

To help other builders, please list the boat you are building in the Thread Subject -- and to conserve space, please limit your posting to one thread per boat.

Please feel free to use the gallery to display multiple images of your progress.
User avatar
mtshrink
Frequent Poster
Frequent Poster
Posts: 11
Joined: Fri Dec 19, 2008 2:17 pm
Location: Anaconda MT

hm19 flip photo

Post by mtshrink »

Image

Image


Image

Image

Image

Image

Image

Image

Finally the photos!



Dog Fish
Very Active Poster
Very Active Poster
Posts: 1430
Joined: Fri Oct 24, 2008 3:27 pm

Post by Dog Fish »

Nothing like a good flip, looking real nice. Good luck.

ks8
* Bateau Builder *
* Bateau Builder *
Posts: 8402
Joined: Mon Nov 24, 2003 1:00 am
Location: NC USA
Location: Now a much longer sail to Tampa Florida! Back to NC, Youngsville FM05tw

Post by ks8 »

That's one tight fit! Glad you had enough room. Time to fair for painting in the early summer? Go to it. :D

Hope you've got some heat in there...

User avatar
mtshrink
Frequent Poster
Frequent Poster
Posts: 11
Joined: Fri Dec 19, 2008 2:17 pm
Location: Anaconda MT

Post by mtshrink »

The photos are a little close up, but I think you can see the basics. I copied Cedarock's frames fore and aft, but the night before my brothers came up to help run the two hiosts, I measured the frames and found out that the diagonal distances were about 1 1/2 inches greater that the 9 ft height of my shop ceiling, so I cut the corners off and reinforced them with the gussets. Yes, I do have a good heating system, will easily keep the shop at 65 degrees. The Northwest Power people really like me, however, since we're still getting nights below freezing here.
My brother holding up 3 fingers is indicating for the camera how many Norwegians it take to turn a boat over.

Spokaloo
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 4064
Joined: Tue Aug 22, 2006 5:29 pm
Location: Spokane, Wa
Location: Spokane, Wa
Contact:

Post by Spokaloo »

Ahh love those squareheads....

E

jacquesmm
Site Admin
Site Admin
Posts: 27824
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Post by jacquesmm »

The one with the red suspenders looks like my brother in law . . :doh:
Jacques Mertens - Designer
http://boatbuildercentral.com

User avatar
mtshrink
Frequent Poster
Frequent Poster
Posts: 11
Joined: Fri Dec 19, 2008 2:17 pm
Location: Anaconda MT

Post by mtshrink »

The one with the red suspenders is me.

jacquesmm
Site Admin
Site Admin
Posts: 27824
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Post by jacquesmm »

Strange . . . We have some Norwegians in our family but still . . .
Jacques Mertens - Designer
http://boatbuildercentral.com

cedarock
Active Poster
Active Poster
Posts: 395
Joined: Tue Dec 18, 2007 9:19 pm
Location: Burlington, NC

Post by cedarock »

Nice flip....looking good! Just think, the next time will be the last time. :)

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests