Tools for sale
- stickystuff
- * Bateau Builder - Expert *
- Posts: 2219
- Joined: Tue Aug 27, 2002 1:00 am
- Location: Crystal River, Fl.
- Location: Crystal River, Fl.
Tools for sale
Sander and other misc. for sale. I have new in the box a 6" Rigid orbital sander for sale. Used once for about 10 minutes. I have mostly air tools which work faster for me. Will sell for $40. plus shipping. Also have Numerous boxes of 6" sand paper(norton)Believe their is 100 sheets to a box, Not sticky back but velcro style. Need special pad for this paper. Also have approx 10 boxes of inline paper for an air file or hand sander. Will inventory today and list the diff grits I have. NO WAY i WILL USE THISMUCH PAPER IN MY LIFETIME. Will list price and grits in the next few days.i can be reached at 352 489-7914 or cell 352 342-6619
Capt. Ken Owens
A little saw dust, a little glue, and a lot of love, and she will float.
A little saw dust, a little glue, and a lot of love, and she will float.
- chlli willie
- Frequent Poster
- Posts: 103
- Joined: Sun Jul 05, 2009 10:15 am
Re: Tools for sale
Hey Ken, Hope your enjoying your time off, I'll give you a call on Saturday .
Re: Tools for sale
Is this the one?
http://www.ridgid.com/Tools/6-Random-Or ... /index.htm
if so, consider it sold! I only have a 1/4 sheet sander, and this looks to be much more efficient (larger disc area). I'd also like some sand paper for it, to hit the ground running. I'll call.
Wade
http://www.ridgid.com/Tools/6-Random-Or ... /index.htm
if so, consider it sold! I only have a 1/4 sheet sander, and this looks to be much more efficient (larger disc area). I'd also like some sand paper for it, to hit the ground running. I'll call.
Wade
Completed : OB19, CC14, GV10.
- stickystuff
- * Bateau Builder - Expert *
- Posts: 2219
- Joined: Tue Aug 27, 2002 1:00 am
- Location: Crystal River, Fl.
- Location: Crystal River, Fl.
Re: Tools for sale
Thats the one.
Capt. Ken Owens
A little saw dust, a little glue, and a lot of love, and she will float.
A little saw dust, a little glue, and a lot of love, and she will float.
Re: Tools for sale
Check's in the mail (cashiers). It went out yesterday. You should get it maybe today, likely Mon.
This'll was just the right timing: I'm about to start fairing the outside of my OB19.
Wade
This'll was just the right timing: I'm about to start fairing the outside of my OB19.
Wade
Completed : OB19, CC14, GV10.
- stickystuff
- * Bateau Builder - Expert *
- Posts: 2219
- Joined: Tue Aug 27, 2002 1:00 am
- Location: Crystal River, Fl.
- Location: Crystal River, Fl.
Re: Tools for sale
Will be on the lookout for it.Will beon the way soon as ck. comes.
Capt. Ken Owens
A little saw dust, a little glue, and a lot of love, and she will float.
A little saw dust, a little glue, and a lot of love, and she will float.
- Knottybuoyz
- Very Active Poster
- Posts: 2581
- Joined: Sun Sep 03, 2006 8:09 pm
- Location: Iroquois, ON Canada
Re: Tools for sale
I might be interested in the 6" discs Ken. What grades do you have?
Yours Aye! Rick
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
- stickystuff
- * Bateau Builder - Expert *
- Posts: 2219
- Joined: Tue Aug 27, 2002 1:00 am
- Location: Crystal River, Fl.
- Location: Crystal River, Fl.
Re: Tools for sale
Most of the disc's are fine grit. 1000, 600 and the like. didn't realise most of them were that fine. I really haven't had the time to see just what I have. These are all hook and loop paper. If you are into automotive finishes I have plenty of that. 100 sheets to a box.I see you are in Canada. Don't have a clue what shipping is. Will have to check.
Capt. Ken Owens
A little saw dust, a little glue, and a lot of love, and she will float.
A little saw dust, a little glue, and a lot of love, and she will float.
- Knottybuoyz
- Very Active Poster
- Posts: 2581
- Joined: Sun Sep 03, 2006 8:09 pm
- Location: Iroquois, ON Canada
Re: Tools for sale
Thnx Sticky. We live near the border so it's no problem to get stuff shipped to the UPS store. I'll let you know when I get to the very fine details.stickystuff wrote:Most of the disc's are fine grit. 1000, 600 and the like. didn't realise most of them were that fine. I really haven't had the time to see just what I have. These are all hook and loop paper. If you are into automotive finishes I have plenty of that. 100 sheets to a box.I see you are in Canada. Don't have a clue what shipping is. Will have to check.
Thanks again.
Yours Aye! Rick
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
"It's not the boat "you built" until you've sworn at it, bled on it, sweated over it, cried beside it and then threatened to haul the POS outside and burn it!"
- stickystuff
- * Bateau Builder - Expert *
- Posts: 2219
- Joined: Tue Aug 27, 2002 1:00 am
- Location: Crystal River, Fl.
- Location: Crystal River, Fl.
Re: Tools for sale
wade, Check recieved today. Sander will be shipped tomorrow. thanks, Ken
Capt. Ken Owens
A little saw dust, a little glue, and a lot of love, and she will float.
A little saw dust, a little glue, and a lot of love, and she will float.
Who is online
Users browsing this forum: No registered users and 12 guests