EMC clear coat and real wood

technical support and information on EMC topcoats and coatings
User avatar
tech_support
Very Active Poster
Very Active Poster
Posts: 12318
Joined: Wed Dec 31, 1969 7:00 pm
Location: Vero Beach, FL
Contact:

Re: EMC clear coat and real wood

Post by tech_support »

8)



User avatar
Cracker Larry
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 22491
Joined: Fri Mar 11, 2005 3:39 pm
Location: Savannah, GA

Re: EMC clear coat and real wood

Post by Cracker Larry »

Looks great! I've got a front door that I need to do the same thing to.
Completed GF12 X 2, GF16, OD18, FS18, GF5, GF18, CL6
"Ships are the nearest things to dreams that hands have ever made." -Robert N. Rose

bigtalljv
Active Poster
Active Poster
Posts: 370
Joined: Mon Jun 25, 2012 12:41 pm
Location: Central Coast CA

Re: EMC clear coat and real wood

Post by bigtalljv »

i have two sets of french doors and and one solid front door left to do. I also have to build a replacement for another entrance.

Jason

bigtalljv
Active Poster
Active Poster
Posts: 370
Joined: Mon Jun 25, 2012 12:41 pm
Location: Central Coast CA

Re: EMC clear coat and real wood

Post by bigtalljv »

ok, i started on the next set. I spent 6 or 7 hours sanding and got the first coat of epoxy on today. You can see in the last picture that it went on a little heavier in places than I would have liked. It soaked in completely some and bubbled in other and was just lumpy elsewhere. I will give it a good sanding tomorrow and get the second coat on then several coats of EMC clear after that.

Bleached:
Image

Sanding:
Image

First coat epoxy:
Image

ks8
* Bateau Builder *
* Bateau Builder *
Posts: 8402
Joined: Mon Nov 24, 2003 1:00 am
Location: NC USA
Location: Now a much longer sail to Tampa Florida! Back to NC, Youngsville FM05tw

Re: EMC clear coat and real wood

Post by ks8 »

Wow, nice! :D

bigtalljv
Active Poster
Active Poster
Posts: 370
Joined: Mon Jun 25, 2012 12:41 pm
Location: Central Coast CA

Re: EMC clear coat and real wood

Post by bigtalljv »

Now the front door. I am quite pleased with the results. I hope this EMC lasts a long time. I really want to forget I had to do this.

Before
Image

After
Image

User avatar
tech_support
Very Active Poster
Very Active Poster
Posts: 12318
Joined: Wed Dec 31, 1969 7:00 pm
Location: Vero Beach, FL
Contact:

Re: EMC clear coat and real wood

Post by tech_support »

nice!
I hope this EMC lasts a long time.
well, its the same stuff that goes on the hulls of boats and also aircraft......so Im betting you have time to forget the pain :)

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests