Page 2 of 2

Re: EMC clear coat and real wood

Posted: Tue Jan 20, 2015 12:18 pm
by tech_support
8)

Re: EMC clear coat and real wood

Posted: Tue Jan 20, 2015 2:07 pm
by Cracker Larry
Looks great! I've got a front door that I need to do the same thing to.

Re: EMC clear coat and real wood

Posted: Tue Jan 20, 2015 2:22 pm
by bigtalljv
i have two sets of french doors and and one solid front door left to do. I also have to build a replacement for another entrance.

Jason

Re: EMC clear coat and real wood

Posted: Thu Jan 29, 2015 12:42 am
by bigtalljv
ok, i started on the next set. I spent 6 or 7 hours sanding and got the first coat of epoxy on today. You can see in the last picture that it went on a little heavier in places than I would have liked. It soaked in completely some and bubbled in other and was just lumpy elsewhere. I will give it a good sanding tomorrow and get the second coat on then several coats of EMC clear after that.

Bleached:
Image

Sanding:
Image

First coat epoxy:
Image

Re: EMC clear coat and real wood

Posted: Thu Jan 29, 2015 12:04 pm
by ks8
Wow, nice! :D

Re: EMC clear coat and real wood

Posted: Wed Mar 11, 2015 8:36 pm
by bigtalljv
Now the front door. I am quite pleased with the results. I hope this EMC lasts a long time. I really want to forget I had to do this.

Before
Image

After
Image

Re: EMC clear coat and real wood

Posted: Thu Mar 12, 2015 9:39 am
by tech_support
nice!
I hope this EMC lasts a long time.
well, its the same stuff that goes on the hulls of boats and also aircraft......so Im betting you have time to forget the pain :)