Nautilus wrote: ↑Tue Dec 07, 2021 10:06 am
I am a she
Gotcha! I'm a he as long as we're sharing.
Nautilus wrote: ↑Tue Dec 07, 2021 10:06 am
My motor measures 22 in vertically from the bottom of the bracket to the cavitation plate.
My transom is 19-7/8 in measured along the transom and ~19-1/4 in measured vertically.
My Suzuki manual specifies the anti-cavitation plate should be located 0 to 1 in. below the bottom of the boat, which is what led me to adding the bracket.
Mystery solved, thanks! I'm in about exactly the same boat, except I got away without the transom riser by bolting the engine on the transom. With the clamps alone I ran out of room to raise it.