3M Fairing Boards Wanted

Forum for the exchange of boat building tools. Not a classified section, tools only please.
George Costanza
Frequent Poster
Frequent Poster
Posts: 23
Joined: Tue Nov 29, 2016 7:19 pm
Location: Tampa

3M Fairing Boards Wanted

Post by George Costanza »

Does anyone have a rigid Fairing Board they would like to sell?

Thanks,
Joe

User avatar
BarraMan
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 2164
Joined: Tue Dec 11, 2012 3:44 pm
Location: Australia

Re: 3M Fairing Boards Wanted

Post by BarraMan »

They used to sell them in "Boat building supplies" on this site - is that no longer the case?

They still do - look here:

http://boatbuildercentral.com/products.php?cat=59

Jeff
Site Admin
Site Admin
Posts: 8435
Joined: Fri Apr 29, 2016 12:17 pm
Location: Vero Beach

Re: 3M Fairing Boards Wanted

Post by Jeff »

BarraMan/George, Yes, we carry these and have them in stock!! Thank you, Jeff

Eric1
Very Active Poster
Very Active Poster
Posts: 3072
Joined: Tue Aug 19, 2014 3:17 pm
Location: Spartanburg,S.C.

Re: 3M Fairing Boards Wanted

Post by Eric1 »

These are what I used, I like them. The 30" is a bit much, so I cut mine down to 2-15" blocks.
Jeff, You need to carry these. Single sizes are available too.

http://www.eastwood.com/large-dura-bloc ... -6pc.html

Jeff
Site Admin
Site Admin
Posts: 8435
Joined: Fri Apr 29, 2016 12:17 pm
Location: Vero Beach

Re: 3M Fairing Boards Wanted

Post by Jeff »

Eric, I will find them tomorrow!! Thank you, Jeff

cape_fisherman
Active Poster
Active Poster
Posts: 321
Joined: Tue Oct 07, 2014 11:04 pm
Location: Harkers Island, NC

Re: 3M Fairing Boards Wanted

Post by cape_fisherman »

Eric1 wrote: Mon Jun 26, 2017 4:40 pm These are what I used, I like them. The 30" is a bit much, so I cut mine down to 2-15" blocks.
Jeff, You need to carry these. Single sizes are available too.

http://www.eastwood.com/large-dura-bloc ... -6pc.html
LoL

Be glad you haven't had to be one man on a two man torture board...5'-6' long !!!

Eric1
Very Active Poster
Very Active Poster
Posts: 3072
Joined: Tue Aug 19, 2014 3:17 pm
Location: Spartanburg,S.C.

Re: 3M Fairing Boards Wanted

Post by Eric1 »

[/quote]

LoL

Be glad you haven't had to be one man on a two man torture board...5'-6' long !!!
[/quote]

Good Lord that would cause pain! 8O

User avatar
stickystuff
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 2219
Joined: Tue Aug 27, 2002 1:00 am
Location: Crystal River, Fl.
Location: Crystal River, Fl.

Re: 3M Fairing Boards Wanted

Post by stickystuff »

Harbor Freight has them in their automotive section next to sandpaper etc. Their sandpaper is crap. Don't waste your money on them. Go to NAPA oe any automotive paint supply for the best paper.
Capt. Ken Owens

A little saw dust, a little glue, and a lot of love, and she will float.

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests