C19 Stretch and re-build - Launched!!
Re: C19 Stretch and re-build - Launched!!
Got the outriggers mounted. Just need to add a center rigger.
Re: C19 Stretch and re-build - Launched!!
Nice half a morning outing to fill up the freezer whilst the mahimahi are around. Good sized cool box is probably the next project. Boat going well. Was happy with the fuel economy. 20lts in 3 hrs trolling at 1900 rpm wasn’t bad.
-
- * Bateau Builder - Expert *
- Posts: 10205
- Joined: Tue Jan 12, 2010 12:25 am
Re: C19 Stretch and re-build - Launched!!
How are you catching those?
-
- * Bateau Builder *
- Posts: 912
- Joined: Tue Aug 13, 2019 3:02 pm
- Location: VA
Re: C19 Stretch and re-build - Launched!!
Yes! Beautiful haul. Beautiful boat and beautiful weather! That a wahoo in the mix too?
Re: C19 Stretch and re-build - Launched!!
Trolling small sailfish lures with a strip bait. Picked up a few followers with a chunk.
Dan_Smullen wrote: ↑Mon Apr 18, 2022 2:35 pm Yes! Beautiful haul. Beautiful boat and beautiful weather! That a wahoo in the mix too?
Yes - one lonely wahoo in the mix!
-
- * Bateau Builder *
- Posts: 1663
- Joined: Sat Jan 10, 2015 7:13 pm
- Location: New Zealand
Re: C19 Stretch and re-build - Launched!!
I’ve built my cooler seat from polyurethane foam sheets glued to plywood. I used a denser foam (100kg per cubic metre or 6lb per cubic foot). Since it’s a heavy foam I just glassed the inside with double bias and faired. Taped the inside corners with woven. It seems stronger than commercial coolers.
Re: C19 Stretch and re-build - Launched!!
Thanks One Way - I was thinking along similar lines.OneWayTraffic wrote: ↑Fri Apr 22, 2022 3:39 pm I’ve built my cooler seat from polyurethane foam sheets glued to plywood. I used a denser foam (100kg per cubic metre or 6lb per cubic foot). Since it’s a heavy foam I just glassed the inside with double bias and faired. Taped the inside corners with woven. It seems stronger than commercial coolers.
Who is online
Users browsing this forum: Ahrefs [Bot], Google [Bot] and 11 guests