Hello,
On the AR15 plans it calls for 12 panels of 6mm plywood. But on the nesting I only see 10 panels and the website study plans also say 10 of the 6mm. I'm thinking I only need 10 but I'd hate to find out i'm 2 panels short with the price of shipping. Any ideas on how many panels I need. Thanks.
Rusty
AR15 BOM question
-
- * Bateau Builder - Expert *
- Posts: 10205
- Joined: Tue Jan 12, 2010 12:25 am
Re: AR15 BOM question
This one is for Jacques. Be patient, he usually answers within a day, often same day even.
Re: AR15 BOM question
I will send Jacques a note to review your question. Jeff
Re: AR15 BOM question
It's 10.
The study plans say 10, the nesting shows 10 but the building notes say 12. We will correct that.
I think it is due to the kit using 12 sheets because of the width of the router bit.
In your case = 10.
The study plans say 10, the nesting shows 10 but the building notes say 12. We will correct that.
I think it is due to the kit using 12 sheets because of the width of the router bit.
In your case = 10.
Jacques Mertens - Designer
http://boatbuildercentral.com
http://boatbuildercentral.com
Re: AR15 BOM question
Thank you all for the help. I just placed my plywood order.
Rusty
Rusty
Re: AR15 BOM question
I just recieved my plywood! That was the quickest and best communicated freight order I've received! Thanks for the great service! In the next couple weeks there will be a new thread started in the builders section
Rusty
Rusty
Re: AR15 BOM question
Excellent Russ-T!! Look forward to your build of the AR15!! Great boat!! Jeff
Re: AR15 BOM question
Hello Rusty.
Finally! Another sailboat builder. I'll be following your build. Good luck.
Bogie
Who is online
Users browsing this forum: No registered users and 13 guests