plywood size

Please see our tutorials and FAQ before posting.
User avatar
topwater
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 3131
Joined: Tue Oct 30, 2007 6:27 pm
Location: Port Charlotte
Location: Florida

plywood size

Post by topwater »

I am having a brain fart, is the metric size of a okume sheet 2440 x1220 :?:
Novi 23 finally launched !

terrulian
* Bateau Builder *
* Bateau Builder *
Posts: 3041
Joined: Sat Dec 07, 2013 11:29 am
Location: Marin County, CA
Contact:

Re: plywood size

Post by terrulian »

8x4' = 2440 x 1220, if that's what you're asking.
Tony
Image

User avatar
topwater
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 3131
Joined: Tue Oct 30, 2007 6:27 pm
Location: Port Charlotte
Location: Florida

Re: plywood size

Post by topwater »

The ply panels are larger than 4x8 that are sold here. Just trying to remember what the
exact size is in metric.
Novi 23 finally launched !

Chenier
Active Poster
Active Poster
Posts: 219
Joined: Wed Feb 14, 2018 5:46 am
Location: Annapolis, Maryland

Re: plywood size

Post by Chenier »

The okume I bought was 2500mm x 1220mm.

User avatar
topwater
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 3131
Joined: Tue Oct 30, 2007 6:27 pm
Location: Port Charlotte
Location: Florida

Re: plywood size

Post by topwater »

Thanks :!:
Novi 23 finally launched !

Capt UB
* Bateau Builder *
* Bateau Builder *
Posts: 3086
Joined: Mon Jan 03, 2011 7:12 pm

Re: plywood size

Post by Capt UB »

The CNC kit is cut on European size plywood, 4' wide but 98-3/8" long


122 x 244 cm

jacquesmm
Site Admin
Site Admin
Posts: 28215
Joined: Wed Aug 14, 2002 1:00 am
Location: Florida USA
Contact:

Re: plywood size

Post by jacquesmm »

Correct.
Imperial size is 96x48 = 122 x 244 cm
Metric ply is 122 x 250 cm.
I have seen some 122 by 255 but it's rare.

All Okume is manufactured in Europe (except the fake chinese stuff) and it is metric size.
Jacques Mertens - Designer
http://boatbuildercentral.com

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests