Page 1 of 1

Blue Sea Fuse Block

Posted: Wed Jun 05, 2019 8:31 pm
by Dutch1
Has anyone had any experience with the Blue Sea Fuse blocks? I've been thinking about using on for the wiring on my boat but wanted to see if anyone had any experience with them first.

https://www.bluesea.com/products/5026/S ... _and_Cover

Re: Blue Sea Fuse Block

Posted: Wed Jun 05, 2019 11:04 pm
by Fuzz
I have the one just like that but it does not have the neg strip built in. I wanted them separate. I have only had it for two years but I am pleased with it.

Re: Blue Sea Fuse Block

Posted: Wed Jun 05, 2019 11:53 pm
by fallguy1000
I have one in a 1960 Carver Commander restoration. I thought mine was all hots, but
It might have a ground node. Nice product.

Re: Blue Sea Fuse Block

Posted: Thu Jun 06, 2019 5:43 am
by OrangeQuest
I bought a ground bus of the BlueSea brand and it looks very well made but have not installed it yet. A lot of marine hardware shops sell their brand. I use their website articles all the time for reference.

Re: Blue Sea Fuse Block

Posted: Thu Jun 06, 2019 9:11 am
by tcason
I used smaller sized block but same style no issues!

Re: Blue Sea Fuse Block

Posted: Thu Jun 06, 2019 11:50 am
by Dutch1
Thanks for the responses everyone! I liked the idea of keeping everything in one piece. I'll post pics once I'm done

Re: Blue Sea Fuse Block

Posted: Thu Jun 06, 2019 12:56 pm
by Capt UB
Put it in a dry place and think about how easy or hard it is to look at or change a fuse in bad weather or ruff seas!!!

There is a great way to make a cover for it,

tupperware electrical box cover

th.jpg
th.jpg (32.71 KiB) Viewed 1407 times

Re: Blue Sea Fuse Block

Posted: Wed Jan 05, 2022 7:41 pm
by APLJaK
I used Blue Sea terminal blocks, fuse blocks, battery switch, etc. There are only a few places I used other than Blue Sea components. They are expensive, but the quality is evident. I would recommend them for sure.
Battery Box
Battery Box
House distribution, mounted
House distribution, mounted

Re: Blue Sea Fuse Block

Posted: Thu Jan 06, 2022 2:23 am
by BarraMan
Wow, I wished my wiring looked like that! 8O