I'm thinking this is a question for Jacques/ BBC crew but all are welcome to chime in.
I'm about to start acquiring the hardware / rigging for my AD16 and will be going with the modified chinese lug sail & rigging that are shown in the plans. I have a few questions...
1. The sail plans for the lug and marconi specify the same hardware and rigging. Am I reading this correctly?
2. Are the following the correct parts I will need?
-masthead
-tangs/ how many?
-boom (I already have the mest)
-outhall cap /how many?
-gooseneck
3. -Can the lug rig be free standing (no shrouds / stays)?
4. -Is the yard built into the sail or do I have to purchase something like a smaller boom?
5. -A fiddle block and cam cleat (attached to the CB case instead of a rear traveler) is mentioned on the
plans page but not listed in the actual sail plan.Do I need any other hardware that's not listed?
Ok I think that does it for now. Thanks in advance,
Bogie
AD16? hardware & rigging for mod chinese rig per plans
Re: AD16? hardware & rigging for mod chinese rig per plans
I'm not going to say a thing....
Oh well,
I can not wait to see her rigged!
Forgot to ask, white or red sail?
Oh well,
I can not wait to see her rigged!
Forgot to ask, white or red sail?
- Jaysen
- * Bateau Builder *
- Posts: 6520
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: AD16? hardware & rigging for mod chinese rig per plans
JM, boogie isn’t planning to run jib. Makes me think the stays become unnecessary. I’m thinking a three block mast head (main, topping, spare). I was thinking clutches vs jamb cleats for mast lines and CB.
Also thinking the “gaff” needs to be 1” OD. Is 3/16 wall ok?
How far off am I?
Also thinking the “gaff” needs to be 1” OD. Is 3/16 wall ok?
How far off am I?
- OrangeQuest
- Very Active Poster
- Posts: 3948
- Joined: Tue Aug 28, 2018 1:14 pm
- Location: Houston, Texas
Re: AD16? hardware & rigging for mod chinese rig per plans
You are way ahead of me on the learning game, I am still trying to figure out what your question was!?
"that it isn't just an ordinary sort of boat. Sometimes it's a Boat, and sometimes it's more of an Accident. It all depends." "Depends on what?" "On whether I'm on the top of it or underneath it."
A. A. Milne
A. A. Milne
Re: AD16? hardware & rigging for mod chinese rig per plans
building the sail boat is only half of it. Learning how to do the rigging is the other.OrangeQuest wrote: ↑Mon Jun 10, 2019 8:32 pm You are way ahead of me on the learning game, I am still trying to figure out what your question was!?
Re: AD16? hardware & rigging for mod chinese rig per plans
Bogieman wrote: ↑Mon Jun 10, 2019 10:27 pmbuilding the sail boat is only half of it. Learning how to do the rigging is the other.OrangeQuest wrote: ↑Mon Jun 10, 2019 8:32 pm You are way ahead of me on the learning game, I am still trying to figure out what your question was!?
Sometime the production boats rigs are not right!!! You have to know a thing or two about rigging.... You are so far ahead of a lot of "sailboat off the shelf" buyers ...
OQ the sail color red or white.
Re: AD16? hardware & rigging for mod chinese rig per plans
CaptUB is that your boat? The rig looks similar to what I'm after.Capt UB wrote: ↑Tue Jun 11, 2019 8:54 amBogieman wrote: ↑Mon Jun 10, 2019 10:27 pmbuilding the sail boat is only half of it. Learning how to do the rigging is the other.OrangeQuest wrote: ↑Mon Jun 10, 2019 8:32 pm You are way ahead of me on the learning game, I am still trying to figure out what your question was!?
Sometime the production boats rigs are not right!!! You have to know a thing or two about rigging.... You are so far ahead of a lot of "sailboat off the shelf" buyers ...
OQ the sail color red or white.
images.jpeg
- OrangeQuest
- Very Active Poster
- Posts: 3948
- Joined: Tue Aug 28, 2018 1:14 pm
- Location: Houston, Texas
Re: AD16? hardware & rigging for mod chinese rig per plans
It looks red but I am guessing I am not right?
"that it isn't just an ordinary sort of boat. Sometimes it's a Boat, and sometimes it's more of an Accident. It all depends." "Depends on what?" "On whether I'm on the top of it or underneath it."
A. A. Milne
A. A. Milne
Re: AD16? hardware & rigging for mod chinese rig per plans
Bogieman wrote: ↑Tue Jun 11, 2019 10:03 amCaptUB is that your boat? The rig looks similar to what I'm after.
I wish I had one like that, but no it's not. I was just showing to old style sail color.
Who is online
Users browsing this forum: Google [Bot] and 4 guests