Due to some urging, I am starting a thread on the building of the Panga 20. This is my first boat build. I've worked with fiberglass on cars and have done quite a bit of woodworking in the past. I'm currently sanding and getting ready to tape and fiberglass the hull. I'll get some pictures up of the process and add some things from my notes to bring it up to speed. Special thanks to the FluidDynamic thread for all of the help from those guys so far. I'm building it in San Antonio but taking it to the Bahamas when it's done. I plan on building the trailer for it also. It's being built as a spearfishing boat. Thanks.
Jerry
Sharkbait PG20
-
- Frequent Poster
- Posts: 119
- Joined: Sun Oct 21, 2018 9:58 am
- Location: San Antone/Bahamas
-
- * Bateau Builder *
- Posts: 449
- Joined: Sun Dec 30, 2018 9:09 pm
- Location: Spanish Fort, AL
Re: Sharkbait PG20
Looking forward to see some pics. We go to the bahamas every year. Great Exuma.
-
- Frequent Poster
- Posts: 119
- Joined: Sun Oct 21, 2018 9:58 am
- Location: San Antone/Bahamas
Re: Sharkbait PG20
We spend a lot of the year in Eleuthera. Lived there full time for 3 years. Miss it every day.FluidDynamic wrote: ↑Sat May 02, 2020 10:52 pm Looking forward to see some pics. We go to the bahamas every year. Great Exuma.
-
- Frequent Poster
- Posts: 119
- Joined: Sun Oct 21, 2018 9:58 am
- Location: San Antone/Bahamas
Re: Sharkbait PG20
Here are the pictures I have. I'll document as well as possible each day. I'm off of work for a while so I'll try to post each day I'm working. Most days.
Last edited by sharkbait2576 on Sun May 03, 2020 7:22 pm, edited 1 time in total.
-
- Frequent Poster
- Posts: 119
- Joined: Sun Oct 21, 2018 9:58 am
- Location: San Antone/Bahamas
-
- Frequent Poster
- Posts: 119
- Joined: Sun Oct 21, 2018 9:58 am
- Location: San Antone/Bahamas
Re: Sharkbait PG20
FluidDynamic thread has definitely helped me. Saved me some time on the epoxy and glass.
-
- * Bateau Builder - Expert *
- Posts: 9123
- Joined: Tue Aug 02, 2011 4:23 am
- Location: Kasilof, Alaska
Re: Sharkbait PG20
That is the beauty of this forum. People who will post not only what went well but what went wrong also. You never know how many others are helped either way.sharkbait2576 wrote: ↑Sun May 03, 2020 6:55 pm FluidDynamic thread has definitely helped me. Saved me some time on the epoxy and glass.
-
- Frequent Poster
- Posts: 119
- Joined: Sun Oct 21, 2018 9:58 am
- Location: San Antone/Bahamas
Re: Sharkbait PG20
Agreed. I am looking forward to getting some glass on this thing and gel coating.Fuzz wrote: ↑Sun May 03, 2020 7:01 pmThat is the beauty of this forum. People who will post not only what went well but what went wrong also. You never know how many others are helped either way.sharkbait2576 wrote: ↑Sun May 03, 2020 6:55 pm FluidDynamic thread has definitely helped me. Saved me some time on the epoxy and glass.
-
- Frequent Poster
- Posts: 119
- Joined: Sun Oct 21, 2018 9:58 am
- Location: San Antone/Bahamas
-
- Frequent Poster
- Posts: 119
- Joined: Sun Oct 21, 2018 9:58 am
- Location: San Antone/Bahamas
Who is online
Users browsing this forum: No registered users and 3 guests