V-hull tank calculations

Post any and all methods for doing things here, if you think you have a good method, that you don't see most builders using
Scrappy
Frequent Poster
Frequent Poster
Posts: 53
Joined: Mon Apr 20, 2020 11:04 am
Location: Sherwood, OR

V-hull tank calculations

Post by Scrappy »

I've been messing around looking at below deck fuel tanks for my FS19 build. I made a quick spreadsheet that calculates: 1) the depth of the bilge at the stringer based on station dimensions from plans, and 2) calculates the volume of a symmetric v-hull tank. Thought others might find it useful for planning frame/bulkhead locations. There are pictures imbedded which make it pretty self-explanatory. Link below.

https://docs.google.com/spreadsheets/d/ ... sp=sharing



Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 8245
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: V-hull tank calculations

Post by Fuzz »

Thanks for posting this. I am sure it will come in handy for a lot of folks.

User avatar
OrangeQuest
Very Active Poster
Very Active Poster
Posts: 3420
Joined: Tue Aug 28, 2018 1:14 pm
Location: Houston, Texas

Re: V-hull tank calculations

Post by OrangeQuest »

I used the same formulas to figure how much foam I needed to pour in each compartment and then how big my live well and bait well needed to be for the gallons I wanted them to hold.

On the foam, I also needed to figure how much foam area I needed to displace for the estimated weight that I wanted the displacement to hold up.

Basically I wanted to make sure I poured enough foam to keep the motor, battery and anchor at the surface and I went about 60 pounds more than that.
But your formulas are very useful for doing a lot of things in boat building. I seen them the other day but didn't have time to comment. Thanks for posting them and Thanks Fuzz for posting about them so I could see them again.

Crazy note: When I was calculating the trim of the boat and where weight was going to be, things like fuel and how much water the wells hold, wood the boat is made of all matter, but when it comes to flotation those things don't matter and considered weightless.
"that it isn't just an ordinary sort of boat. Sometimes it's a Boat, and sometimes it's more of an Accident. It all depends." "Depends on what?" "On whether I'm on the top of it or underneath it."
A. A. Milne

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest