Any advice on the benchtop lids?
I can either glue the lids and glass them and cut the lids back in or I can put a cleat on the edges of the box section and just flop the lids down.
Roseburg marine ply 3/4" is the plan.
I sent a message to Richard, Aripeka Richard, but couldn't load the pic in the private message.
Bench top lids
-
- * Bateau Builder - Expert *
- Posts: 10203
- Joined: Tue Jan 12, 2010 12:25 am
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Bench top lids
There is nothing in the setting that would prevent an image being sent as a PM other than hard coded size limits.
If you have a large size image (which you do) you should upload it to a gallery (coppermine or phpBB gallery) and link using bbcode.
If you have a large size image (which you do) you should upload it to a gallery (coppermine or phpBB gallery) and link using bbcode.
-
- * Bateau Builder - Expert *
- Posts: 10203
- Joined: Tue Jan 12, 2010 12:25 am
Re: Bench top lids
I think the thing said I had a 50MBlimit, but the pic nowhere near that.Jaysen wrote: ↑Tue Nov 17, 2020 7:29 pm There is nothing in the setting that would prevent an image being sent as a PM other than hard coded size limits.
Screen Shot 2020-11-17 at 7.27.48 PM.png
If you have a large size image (which you do) you should upload it to a gallery (coppermine or phpBB gallery) and link using bbcode.
-
- * Bateau Builder *
- Posts: 912
- Joined: Tue Aug 13, 2019 3:02 pm
- Location: VA
Re: Bench top lids
I'm not exactly sure what we're looking at, but if these will be under cushion seat storage, cleats around the opening with a plywood lid, set in place, with a finger hole is what we had on the California built steel seiner I used to work on. They worked well for storing pantry items and beer.
My apologies of this doesn't address what your asking.
My apologies of this doesn't address what your asking.
- Jaysen
- * Bateau Builder *
- Posts: 6519
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Bench top lids
I see no limits or quotas. If you see the message again, please grab a screen shot so I can chase it down.fallguy1000 wrote: ↑Tue Nov 17, 2020 8:21 pmI think the thing said I had a 50MBlimit, but the pic nowhere near that.Jaysen wrote: ↑Tue Nov 17, 2020 7:29 pm There is nothing in the setting that would prevent an image being sent as a PM other than hard coded size limits.
Screen Shot 2020-11-17 at 7.27.48 PM.png
If you have a large size image (which you do) you should upload it to a gallery (coppermine or phpBB gallery) and link using bbcode.
Who is online
Users browsing this forum: No registered users and 10 guests