GV11 - April 2021 - JNB’s build

Post your launchings, and post-launch adventures here. Please keep the to plan/date format.
jnb
Frequent Poster
Frequent Poster
Posts: 36
Joined: Fri May 15, 2015 1:26 am
Location: Seattle

GV11 - April 2021 - JNB’s build

Post by jnb »

Well I sort of finished this GV11 build last fall but intended on doing a lot more fairing once the weather warmed up. Then the weather warmed up and I decided to say screw it and just call it complete so I could start fishing.

Haven’t measured the speed but it feels like a jet ski with a Tohatsu 9.8. Also moves well with a 40lb electric on small lakes.

And yeah, I know the color is ugly but why build a boat if you can’t paint it a weird color?
F0BF47C5-6CBC-4D7C-AADE-466E04868532.jpeg
5D89EB44-489B-49DC-BE20-025ED200B606.jpeg
A89BE1FB-49A0-4375-9D9A-67D7E94E7800.jpeg
BD00B4B4-5E44-4424-8F8E-B65114099DED.jpeg
CF560530-7D6B-4F18-B59D-E287DECF53E0.jpeg

Jeff
Site Admin
Site Admin
Posts: 8435
Joined: Fri Apr 29, 2016 12:17 pm
Location: Vero Beach

Re: GV11 - April 2021 - JNB’s build

Post by Jeff »

Congrats!!! Jeff

Fuzz
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 8920
Joined: Tue Aug 02, 2011 4:23 am
Location: Kasilof, Alaska

Re: GV11 - April 2021 - JNB’s build

Post by Fuzz »

Very nice! Good looking fish also. I see you are trolling with a down rigger. Never seen one on a skiff before but it looks good.

User avatar
VT_Jeff
* Bateau Builder *
* Bateau Builder *
Posts: 1857
Joined: Fri Oct 25, 2019 6:32 pm
Location: vermont

Re: GV11 - April 2021 - JNB’s build

Post by VT_Jeff »

jnb wrote: Tue May 04, 2021 11:48 pm Well I sort of finished this GV11 build last fall but intended on doing a lot more fairing once the weather warmed up. Then the weather warmed up and I decided to say screw it and just call it complete so I could start fishing.
Very smart!
jnb wrote: Tue May 04, 2021 11:48 pm And yeah, I know the color is ugly but why build a boat if you can’t paint it a weird color?
I disagree. At least from the photos, it's got a nice nautical look to it. The skiffs that they rent at my marina are the same color and my wife's SUP company sells a SUP in just about the same color, they are quite popular.

Also love the downrigger, btw!
There are only two seasons in Vermont: boating season, and boat-building season.

Completed Paul Butler 14' Clark Fork Drifter
Completed Jacques Mertens FS14LS + 10%, Build Thread
Started Iain Oughtred Tammie Norrie

jnb
Frequent Poster
Frequent Poster
Posts: 36
Joined: Fri May 15, 2015 1:26 am
Location: Seattle

Re: GV11 - April 2021 - JNB’s build

Post by jnb »

Thanks guys, the downrigger is definitely only a fair weather item at the moment because reaching out over the side is a little sketchy. I'll probably move it forward a bit. I've got a lighter ball and relatively light braided line on it, so if I make a really big mistake and it gets hung up it should break off before pulling me under. As a practical matter, I am only going to be using it mid-water-column in places I'm really familiar with. I'm in Seattle, which is a very downrigger-centric part of the world--no boat is complete up here without downriggers. Even some people fishing salmon with canoes and kayaks use downriggers in these parts.

fallguy1000
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 10198
Joined: Tue Jan 12, 2010 12:25 am

Re: GV11 - April 2021 - JNB’s build

Post by fallguy1000 »

That is a manual Scotty and it is okay, but I recommend keeping a wire cutters and piece of leather close. That or any rigger is a liability in a small boat and always be ready to snip it off. I have the same one.

Is that a king? Nice fish. I am jealous.
My boat build is here -------->

viewtopic.php?f=12&t=62495

jnb
Frequent Poster
Frequent Poster
Posts: 36
Joined: Fri May 15, 2015 1:26 am
Location: Seattle

Re: GV11 - April 2021 - JNB’s build

Post by jnb »

fallguy1000 wrote: Wed May 05, 2021 11:58 pm That is a manual Scotty and it is okay, but I recommend keeping a wire cutters and piece of leather close. That or any rigger is a liability in a small boat and always be ready to snip it off. I have the same one.

Is that a king? Nice fish. I am jealous.
I run braid on it and keep a sharp knife in the same place, so it’s quicker to cut than wire if need be. But agreed, gotta be careful with it.

The fish is actually a big cutthroat. Unfortunately the salmon seasons are now what they used to be, so cuttys in the lakes are the next best thing in the winter.

TomW1
Very Active Poster
Very Active Poster
Posts: 5844
Joined: Sun Apr 19, 2015 10:57 pm
Location: Bryson City, NC

Re: GV11 - April 2021 - JNB’s build

Post by TomW1 »

Nicely done. Very nice cutthroat, will be good eating. Agree with you move the down rigger a little forward for balancing out the GV. Definitely needed in your part of the world.

Tom
Restored Mirror Dinghy, Bought OD18 built by CL, Westlawn School of Yacht Design courses. LT US Navy 1970-1978

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests