System Three Yacht Primer by Weight

See our FAQ and tutorials before posting.
fallguy1000
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 10198
Joined: Tue Jan 12, 2010 12:25 am

System Three Yacht Primer by Weight

Post by fallguy1000 »

I have to do some small batch work.

Came up with the following:

40cc Part B is 50g
10cc Part A is 8g

Mix ratio by weight is 50:8 or 100:16...

Anyhow, hope this helps someone or Systems 3 corrects me if wrong. I did not measure large quantities; so could be an error.
My boat build is here -------->

viewtopic.php?f=12&t=62495

User avatar
BrianC
* Bateau Builder *
* Bateau Builder *
Posts: 376
Joined: Tue Dec 01, 2015 11:10 am
Location: Cedar Point, NC
Contact:

Re: System Three Yacht Primer by Weight

Post by BrianC »

I got 100:18.5 when I weighted out a pint batch last year.
SK14 completed ——— GV15 under construction "...there is nothing - absolutely nothing - half so much worth doing as simply messing about in boats.”
The Wind in the Willows — Kenneth Grahame

fallguy1000
* Bateau Builder - Expert *
* Bateau Builder - Expert *
Posts: 10198
Joined: Tue Jan 12, 2010 12:25 am

Re: System Three Yacht Primer by Weight

Post by fallguy1000 »

BrianC wrote: Wed Oct 27, 2021 11:32 am I got 100:18.5 when I weighted out a pint batch last year.
Good stuff!

I'd trust your numbers more as I was concerned about the small volume accuracy.
My boat build is here -------->

viewtopic.php?f=12&t=62495

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests