Any ideas on how to deal with or mitigate creivce corrosion for these beams, now that I am heading to saltwater?
Crevice corrosion
-
- * Bateau Builder - Expert *
- Posts: 10205
- Joined: Tue Jan 12, 2010 12:25 am
-
- * Bateau Builder - Expert *
- Posts: 10205
- Joined: Tue Jan 12, 2010 12:25 am
Re: Crevice corrosion
As you can see the sockets are open on one side.
The lids need a coat of non-skid to match.
All opinions are welcome.
The lids do not seal as designed. The beams are not painted, but perhaps I could take the boat apart next winter and chromate convert and paint them..
The lids need a coat of non-skid to match.
All opinions are welcome.
-
OnlineJaysen
- * Bateau Builder *
- Posts: 6520
- Joined: Wed Aug 05, 2015 7:59 am
- Location: St Helena Island, SC
- Contact:
Re: Crevice corrosion
Spam post deleted.
Other than drain holes and frequent flush, clean, repair, I know of nothing that works “long term”.
Other than drain holes and frequent flush, clean, repair, I know of nothing that works “long term”.
Who is online
Users browsing this forum: Bing [Bot], Yandex [Bot] and 15 guests