I'm thinking of building a paddle board. Do you have paddle board foam plans laying around?
Thanks
Cbuf
Paddle Board Plans
Paddle Board Plans
See my LM 18 build here.
viewtopic.php?t=64254
See my LM 18 Questions here.
viewtopic.php?f=2&t=64299&hilit=lm18\
Finished Boat Here
viewtopic.php?f=25&t=65173
viewtopic.php?t=64254
See my LM 18 Questions here.
viewtopic.php?f=2&t=64299&hilit=lm18\
Finished Boat Here
viewtopic.php?f=25&t=65173
Re: Paddle Board Plans
Cbuf I thought they did many years ago but I can't find it now. They still sell the surf board/paddle board epoxy, see System 3 surf board epoxy.
Tom
Tom
Restored Mirror Dinghy, Bought OD18 built by CL, Westlawn School of Yacht Design courses. LT US Navy 1970-1978
Re: Paddle Board Plans
That's what I was thinking, too. My recollection was along the lines of a CNC cut kit, there were a lot of pieces that had to fit precisely.
Hank
Re: Paddle Board Plans
It's possible I'm thinking of the FS13, once referred to as a SUP: viewtopic.php?p=366898&hilit=paddle+board+kit#p366898
Hank
Re: Paddle Board Plans
Thanks pee wee that is the one I was thinking of only the SUP has baa been removed. Tom
Restored Mirror Dinghy, Bought OD18 built by CL, Westlawn School of Yacht Design courses. LT US Navy 1970-1978
Re: Paddle Board Plans
I think I found something of interest.
https://sliverpaddleboards.com/
They sell the frame templates, it looks like a ton of shaping and sanding. Perfect relaxation, as I kind of like sanding once I get into it.
https://sliverpaddleboards.com/
They sell the frame templates, it looks like a ton of shaping and sanding. Perfect relaxation, as I kind of like sanding once I get into it.
See my LM 18 build here.
viewtopic.php?t=64254
See my LM 18 Questions here.
viewtopic.php?f=2&t=64299&hilit=lm18\
Finished Boat Here
viewtopic.php?f=25&t=65173
viewtopic.php?t=64254
See my LM 18 Questions here.
viewtopic.php?f=2&t=64299&hilit=lm18\
Finished Boat Here
viewtopic.php?f=25&t=65173
Re: Paddle Board Plans
Cbuf, beautiful boards. Tom
Restored Mirror Dinghy, Bought OD18 built by CL, Westlawn School of Yacht Design courses. LT US Navy 1970-1978
Re: Paddle Board Plans
they decided after some testing that a paddleboard is more challenging than most people would be able to build. a few thousandths of an inch here and there and it won’t work right. They turned the paddleboard into the FS13, which can be paddled just like a paddleboard.
-
- Active Poster
- Posts: 270
- Joined: Mon Aug 04, 2008 9:33 am
- Location: Virginia
- Location: Virginia
Re: Paddle Board Plans
clcboats.com has a nice SUP kit. My understanding of these is that they need to be very precise or it doesn't work well. The only way to get the required accuracy is CNC cutting. So, kit only is the way to go.
- BB Sig
- Very Active Poster
- Posts: 1751
- Joined: Thu Sep 29, 2011 9:20 am
- Location: Tallahassee, FL
- Contact:
Re: Paddle Board Plans
I remember they tried a paddleboard, but they didn't foam it and had problems with the expansion. I think the best one would be an FS13 with the sides cut down at the sole.
Who is online
Users browsing this forum: No registered users and 7 guests