I would like to know if Interlux Fiberglass Bottomkote can be applied directly over System Three Yacht Primer. Thanks
The Walrus
antifouling over yacht primer
-
- Frequent Poster
- Posts: 112
- Joined: Sat Aug 15, 2009 8:53 am
- Location: Halifax Nova Scotia
-
- * Bateau Builder - Expert *
- Posts: 10205
- Joined: Tue Jan 12, 2010 12:25 am
Re: antifouling over yacht primer
Probably fine, but you normally apply the antifouling within a window of time after primer.THE WALRUS wrote: ↑Thu Jul 13, 2023 8:28 pm I would like to know if Interlux Fiberglass Bottomkote can be applied directly over System Three Yacht Primer. Thanks
The Walrus
Re: antifouling over yacht primer
The System Three Yacht Primer (now called Pennant Primer) is an epoxy based primer. Should not be an issue to use as a base for your Bottomkote. I would go to the Interlux website and pull the TDS for the Bottomkote just to be sure.
-Reid
-Reid
Someone asked me, if I were stranded on a desert island what book would I bring... "How to Build a Boat."
- Steven Wright
- Steven Wright
Who is online
Users browsing this forum: No registered users and 1 guest